Ball-burnishing effect on deep residual stress on AISI 1038 and AA2017-T4

Ball-burnishing induces compressive residual stresses on treated materials by the effect of plastic deformation. The result is an increase in the fatigue life of the treated part, retarding the initiation of cracks on the surface. Compressive residual stresses have been previously measured by X-ray diffraction near the surface, revealing considerably high values at the maximum analyzed depth, in relation to other finishing processes such as shot peening. However, the maximum analyzed depth is very limited by using this technique. In this paper, the incremental hole drilling (IHD) technique is tested to measure residual stresses, being able to reach a 2-mm measuring depth. To that objective, a commercial strain gage is used and calibrated using finite element model simulations. A second Finite Element Model based on material removal rate is developed to obtain the equations to calculate the strain release through IHD. Finally, residual stresses are measured experimentally with that technique on two different materials, confirming that ball-burnishing increases the compressive residual stresses in layers up to 0.5¿mm deep for the testing conditions, which is a good response to industrial needs. The method proves to be suitable, simple and inexpensive way to measure the value of these tensions.Preprin

A CFD comparative study of bubbling fluidized bed behavior with thermal effects using the open-source platforms mfix and openfoam

This work studies the performance of two open-source CFD codes, OpenFOAM and MFiX, to address bubbling fluidized bed system at different temperature and heat transfer conditions. Both codes are used to predict two parameters that are relevant for the design of fluidized units: the minimum fluidization velocity as a function of the temperature of the bed and wall-to-bed heat transfer coefficient from a lateral wall and from internal tubes. Although the CFD solvers are structuraly similar, there are some key differences (available models, meshing techniques, and balance formula-tions) that are often translated into differences in the fields prediction. The computational results are compared between both codes and against the experimental data. The minimum fluidization velocity can be correctly predicted with both codes at different temperatures while, in general, for the heat transfer and the fluidization patterns, MFiX shows slightly more accurate results compared to OpenFOAM but with low versatility for meshing curved geometries which might translate into higher computational costs for the same level of accuracy.Fil: Reyes Urrutia, Ramón Andrés. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte. Instituto de Investigación y Desarrollo en Ingeniería de Procesos, Biotecnología y Energías Alternativas. Universidad Nacional del Comahue. Instituto de Investigación y Desarrollo en Ingeniería de Procesos, Biotecnología y Energías Alternativas; ArgentinaFil: Venier, César Martín. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Centro de Investigaciones en Métodos Computacionales. Universidad Nacional del Litoral. Centro de Investigaciones en Métodos Computacionales; ArgentinaFil: Mariani, Nestor Javier. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - La Plata. Centro de Investigación y Desarrollo en Ciencias Aplicadas "Dr. Jorge J. Ronco". Universidad Nacional de la Plata. Facultad de Ciencias Exactas. Centro de Investigación y Desarrollo en Ciencias Aplicadas; ArgentinaFil: Nigro, Norberto Marcelo. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Santa Fe. Centro de Investigaciones en Métodos Computacionales. Universidad Nacional del Litoral. Centro de Investigaciones en Métodos Computacionales; ArgentinaFil: Rodriguez, Rosa Ana. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte. Instituto de Investigación y Desarrollo en Ingeniería de Procesos, Biotecnología y Energías Alternativas. Universidad Nacional del Comahue. Instituto de Investigación y Desarrollo en Ingeniería de Procesos, Biotecnología y Energías Alternativas; ArgentinaFil: Mazza, German Delfor. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Patagonia Norte. Instituto de Investigación y Desarrollo en Ingeniería de Procesos, Biotecnología y Energías Alternativas. Universidad Nacional del Comahue. Instituto de Investigación y Desarrollo en Ingeniería de Procesos, Biotecnología y Energías Alternativas; Argentin

Analysis of the key features of the seismic actions due to the three main earthquakes of May 11, 2011 in Lorca, Spain

The seismic records are in general valuable information, especially in cases where damage in buildings has occurred. The main purpose of the present document is to describe the principal results of the analysis of features of ground motions due to the main three earthquakes that occurred in Spain on May 11, 2011. In this day the major earthquake had a magnitude of 5.1 Mw. This event triggered different levels of damage in numerous buildings in the city of Lorca located in southern Spain. Unfortunately, 9 persons died due mainly to the collapse of non-structural elements. We describe in the present paper the application of the software Seismograms Analyzer-e (SA-e) to perform the processing and the analysis of the seismic records obtained in five stations during the main three earthquakes on May 11 (the largest earthquake of magnitude 5.1 Mw, the precursor of magnitude 4.5 Mw, and the aftershock of magnitude 3.9 Mw). We also highlight the significant similitudes between the seismograms generated in the LOR station during these three earthquakes. Additionally, we determined the values of acceleration that occurred in the roof of the buildings of Lorca, because these values of acceleration contributed both to the damage of numerous buildings and the collapse of several parapets of some buildings. The analysis of these accelerations is relevant because the collapse of some parapets was the cause of the death of the 9 people that died during the main earthquake. For example, according to our study in the roof of a building with a fundamental period of 0.25 s the acceleration could have reached values near to 1.04 g. We also analyzed the potential of damage in function of the values of CAVSTD. Additionally, we determined hypothetical seismic forces for the design of parapets in buildings of Lorca considering the NCSE-02 normative, and the values of Sa based on the seismic records. We determined a significant difference between the seismic forces that could have been used to design the parapets of the buildings in the Lorca city and the forces determined according to the values of PGA that were proposed in a recent study of seismic hazard for Spain.The first author acknowledges to CONACYT, Barcelona Supercomputing Center, and to the Universidad Veracruzana by their contribution to the development of the present study. Complementary information about Seismograms Analyzer-e is available on the WEB page of SA-e2 . .Peer ReviewedPostprint (published version

National Prevalence and Trends of HIV Transmitted Drug Resistance in Mexico

BACKGROUND: Transmitted drug resistance (TDR) remains an important concern for the management of HIV infection, especially in countries that have recently scaled-up antiretroviral treatment (ART) access. METHODOLOGY/PRINCIPAL FINDINGS: We designed a study to assess HIV diversity and transmitted drug resistance (TDR) prevalence and trends in Mexico. 1655 ART-naïve patients from 12 Mexican states were enrolled from 2005 to 2010. TDR was assessed from plasma HIV pol sequences using Stanford scores and the WHO TDR surveillance mutation list. TDR prevalence fluctuations over back-projected dates of infection were tested. HIV subtype B was highly prevalent in Mexico (99.9%). TDR prevalence (Stanford score>15) in the country for the study period was 7.4% (95% CI, 6.2∶8.8) and 6.8% (95% CI, 5.7∶8.2) based on the WHO TDR surveillance mutation list. NRTI TDR was the highest (4.2%), followed by NNRTI (2.5%) and PI (1.7%) TDR. Increasing trends for NNRTI (p = 0.0456) and PI (p = 0.0061) major TDR mutations were observed at the national level. Clustering of viruses containing minor TDR mutations was observed with some apparent transmission pairs and geographical effects. CONCLUSIONS: TDR prevalence in Mexico remains at the intermediate level and is slightly lower than that observed in industrialized countries. Whether regional variations in TDR trends are associated with differences in antiretroviral drug usage/ART efficacy or with local features of viral evolution remains to be further addressed

Uso de los modelos 3D de los corazones fetales en la docencia multidisciplinar del diagnóstico tratamiento y pronóstico de las cardiopatías congénitas complejas

Como continuidad a un proyecto de innovación docente previo basado en el desarrollo de los modelos 3D del corazón fetal, normal y patológico, en estos momentos somos más conscientes como esta tecnología La tecnología 3D supone un cambio de paradigma en docencia en la que pueden participar, obstetras, pediatras, cirujanos cardiacos infantiles y además anatomopatólogos. Como hemos destacado los modelos 3d son un tipo de manufactura aditiva que permite transformar un modelo digital en un objeto tridimensional real y tangible. Esto permite una docencia teórico-práctica innovadora que se enmarca en el contexto moderno de una atención médica personalizada (medicina de precisión centrada en el paciente, visible y comprensible por el estudiante, comprensión en el proceso de comunicación médica con el paciente y con el resto de profesionales médicos que atienden a los pacientes, ayuda en la toma de decisiones ante el diagnostico de entidades patológicas, entre otras cuestiones)

Effect of a mediterranean diet intervention on dietary glycemic load and dietary glycemic index: the predimed study

Objective. To compare the one year effect of two dietary interventions with MeDiet on GL and GI in the PREDIMED trial. Methods. Participants were older subjects at high risk for cardiovascular disease. This analysis included 2866 nondiabetic subjects. Diet was assessed with a validated 137-item food frequency questionnaire (FFQ). The GI of each FFQ item was assigned by a 5-step methodology using the International Tables of GI and GL Values. Generalized linear models were fitted to assess the relationship between the intervention group and dietary GL and GI at one year of follow-up, using control group as reference. Results. Multivariate-adjusted models showed an inverse association between GL and MeDiet + extra virgin olive oil (EVOO) group: β = -8.52 (95% CI: -10.83 to -6.20) and MeDiet + Nuts group: β = -10.34 (95% CI: -12.69 to -8.00), when comparing with control group. Regarding GI, β = -0.93 (95% CI: -1.38 to -0.49) for MeDiet + EVOO, β = -1.06 (95% CI: -1.51 to -0.62) for MeDiet + Nuts when comparing with control group. Conclusion. Dietary intervention with MeDiet supplemented with EVOO or nuts lowers dietary GL and GI

REQUITE: A prospective multicentre cohort study of patients undergoing radiotherapy for breast, lung or prostate cancer

Purpose: REQUITE aimed to establish a resource for multi-national validation of models and biomarkers that predict risk of late toxicity following radiotherapy. The purpose of this article is to provide summary descriptive data. Methods: An international, prospective cohort study recruited cancer patients in 26 hospitals in eight countries between April 2014 and March 2017. Target recruitment was 5300 patients. Eligible patients had breast, prostate or lung cancer and planned potentially curable radiotherapy. Radiotherapy was prescribed according to local regimens, but centres used standardised data collection forms. Pre-treatment blood samples were collected. Patients were followed for a minimum of 12 (lung) or 24 (breast/prostate) months and summary descriptive statistics were generated. Results: The study recruited 2069 breast (99% of target), 1808 prostate (86%) and 561 lung (51%) cancer patients. The centralised, accessible database includes: physician-(47,025 forms) and patient-(54,901) reported outcomes; 11,563 breast photos; 17,107 DICOMs and 12,684 DVHs. Imputed genotype data are available for 4223 patients with European ancestry (1948 breast, 1728 prostate, 547 lung). Radiation-induced lymphocyte apoptosis (RILA) assay data are available for 1319 patients. DNA (n = 4409) and PAXgene tubes (n = 3039) are stored in the centralised biobank. Example prevalences of 2-year (1-year for lung) grade >= 2 CTCAE toxicities are 13% atrophy (breast), 3% rectal bleeding (prostate) and 27% dyspnoea (lung). Conclusion: The comprehensive centralised database and linked biobank is a valuable resource for the radiotherapy community for validating predictive models and biomarkers. Patient summary: Up to half of cancer patients undergo radiation therapy and irradiation of surrounding healthy tissue is unavoidable. Damage to healthy tissue can affect short-and long-term quality-of-life. Not all patients are equally sensitive to radiation "damage" but it is not possible at the moment to identify those who are. REQUITE was established with the aim of trying to understand more about how we could predict radiation sensitivity. The purpose of this paper is to provide an overview and summary of the data and material available. In the REQUITE study 4400 breast, prostate and lung cancer patients filled out questionnaires and donated blood. A large amount of data was collected in the same way. With all these data and samples a database and biobank were created that showed it is possible to collect this kind of information in a standardised way across countries. In the future, our database and linked biobank will be a resource for research and validation of clinical predictors and models of radiation sensitivity. REQUITE will also enable a better understanding of how many people suffer with radiotherapy toxicity

Observation of the Rare Decay of the η Meson to Four Muons

A search for the rare η→μ+μ−μ+μ− double-Dalitz decay is performed using a sample of proton-proton collisions, collected by the CMS experiment at the CERN LHC with high-rate muon triggers during 2017 and 2018 and corresponding to an integrated luminosity of 101  fb−1. A signal having a statistical significance well in excess of 5 standard deviations is observed. Using the η→μ+μ− decay as normalization, the branching fraction B(η→μ+μ−μ+μ−)=[5.0±0.8(stat)±0.7(syst)±0.7(B2μ)]×10−9 is measured, where the last term is the uncertainty in the normalization channel branching fraction. This work achieves an improved precision of over 5 orders of magnitude compared to previous results, leading to the first measurement of this branching fraction, which is found to agree with theoretical predictions

Measurement of B-c(2S)(+) and B-c*(2S)(+) cross section ratios in proton-proton collisions at root s=13 TeV

Peer reviewe

Search for new physics in multijet events with at least one photon and large missing transverse momentum in proton-proton collisions at 13 TeV

A search for new physics in final states consisting of at least one photon, multiple jets, and large missing transverse momentum is presented, using proton-proton collision events at a center-of-mass energy of 13 TeV. The data correspond to an integrated luminosity of 137 fb−1, recorded by the CMS experiment at the CERN LHC from 2016 to 2018. The events are divided into mutually exclusive bins characterized by the missing transverse momentum, the number of jets, the number of b-tagged jets, and jets consistent with the presence of hadronically decaying W, Z, or Higgs bosons. The observed data are found to be consistent with the prediction from standard model processes. The results are interpreted in the context of simplified models of pair production of supersymmetric particles via strong and electroweak interactions. Depending on the details of the signal models, gluinos and squarks of masses up to 2.35 and 1.43 TeV, respectively, and electroweakinos of masses up to 1.23 TeV are excluded at 95% confidence level